HP ProLiant BL280c - G6 Server - Smx_Ethernetremoteaccessavailabletoipendpoint

Ethernet port 28
Table 2-16 Class: SMX_RemoteServiceAccessPoint
Property name
Property implementation
CIM_ManagedElement
ElementName A unique description of the gateway, for example:
RemoteServiceAccessPoint: Gateway for
<interface_name>
CIM_ManagedSystemElement
CIM_LogicalElement
CIM_EnabledLogicalElement
CIM_ServiceAccessPoint
CreationClassName SMX_RemoteServiceAccessPoint
Name A unique description of the gateway, for example:
RemoteServiceAccessPoint: Gateway for
<interface_name>
SystemCreationClassName SMX_ComputerSystem
SystemName SMX_ComputerSystem.Name
CIM_RemoteServiceAcessPoint
AccessContext 0 (Unknown)
2 (Default Gateway)
AccessInfo If ProtocolIFType = 4095 (IPv4), then text value is dot-
delimited ip address of default gateway, otherwise
0.0.0.0 if default gateway is unassigned.
If ProtocolIFType = 4097 or 4098 (IPv6), the text
value is either a valid IPv6 Address or /128 if default
gateway is unassigned.
InfoFormat 3 (IPv4 Address)
4 (IPv6 Address)
2-3-16 SMX_EthernetRemoteAccessAvailableToIPEndpoint
SMX_RemoteAccessAvailableToIPEndpoint implements the class
HP_RemoteAccessAvailableToIPEndpoint and associates the Default Gateway represented by
SMX_RemoteAccessPoint instance to the IP Protocol Endpoint which has access to it.
NOTE: Currently not implemented on VMware ESXi platform.
Table 2-17 Class: SMX_RemoteAccessAvailableToIPEndpoint
Property name Property implementation
CIM_Dependency
CIM_RemoteAccessAvailableToElement