HP ProLiant BL280c - G6 Server - Smx_Memberofpowerredundancy

System Power Supply 292
Table 10-4 Class: SMX_PowerRedundancySet
Property name
Property implementation
CIM_SystemSpecificCollection
InstanceID Unique identifier for this power redundancy instance
CIM_RedundancySet
MaxNumberSupported The maximum number of power supplies supported for
this redundancy set
MinNumberNeeded The minimum number of power supplies needed to
function
TypeOfSet 3 (Load Balanced)
LoadBalanceAlgorithm 0 (Unknown)
RedundancyStatus 0 (Unknown) – if the redundancy status is unknown
2 (Fully Redundant) – if the all power supplies in the set
are operating properly and enough to achieve
redundancy
3 (Degraded Redundancy) – if there are at least
enough power supplies for the redundancy set to
provide power, but power supplies have failed
4 (Redundancy Lost) – if there are not enough power
supplies required to achieve redundancy, but there are
enough for the redundancy set to provide power
5 (Overall Failure) – if there are not enough power
supplies operating properly for the redundancy set to
provide power.
10-3-4 SMX_MemberOfPowerRedundancy
SMX_MemberOfPowerRedundancy is used to represent an association between HP_PowerSupply and
HP_PowerRedundancySet.
Table 10-5
Class: SMX_MemberOfPowerRedundancy
Property name
Property implementation
Collection References HP_PowerRedundancySet
Included Writeable boolean property indicating if the power
supply instance referenced by Member will contribute
status to the HP_PowerCollection.
•
TRUE: Include member status in collection status
•
FALSE: Do not include member status in collection
status
Member
References HP_PowerSupply