HP ProLiant BL280c - G6 Server - Hpvc_Sastoragevolume

Smart Array View Class 155
Table 5-4 Class: HPVC_SAStorageExtent
Property name
Property implementation
CIM_EnabledLogicalElement
CIM_LogicalDevice
CreationClassName HPVC_SAStorageExtent
DeviceID HPVC_SAStorageExtent-<model>-<serial number>
For example, HPVC_SAStorageExtent-
HPDG072BB975-3NP2TCCF000098402P95
SystemCreationClassName SMX_ComputerSystem
SystemName Server host name
CIM_StorageExtent
BlockSize Block size in bytes
NumberOfBlocks Total number of blocks on disk drive
Primordial Set to True
VMware_StorageExtent
HPVC_SAStorageExtent
5-2-5 HPVC_SAStorageVolume
HPVC_SAStorageExtent represents logical volumes configured on Smart Array controller. There will
be one instance per logical volume.
Table 5-5
Class: HPVC_SAStorageVolume
Property name
Property implementation
CIM_ManagedElement
ElementName Logical Volume Y on HPSA X : RAID level : Capacity :
Associated Physical Disks : Detailed Status
Associated Physical Disks reports a list of physical disks
that are associated with this logical volume. Physical
disk’s index should match the one reported in
HPVC_StorageExtentElement Name.
Detailed Status shows detailed volume status
information when this logical volume is degraded or
fai
led. When logical volume is in an OK condition, this
field should be an empty string.
For example, Logical Volume 1 on HPSA 1 : RAID 0 :
68GB : Disk 1, 3, 4 : Interim Recovery
CIM_ManagedSystemElement