HP ProLiant BL280c - G6 Server - Page 301

System Power Supply 301
Table 10-21 Class: SMX_PowerMeter
Property name
Property implementation
Caption Short description of this power utilization sensor using
the name of the power supply displayed by the MP or
iLO and location.
For example: Power utilization sensor for Power
Supply 1 at PowerSupplySlot=1
Description Description of this power utilization sensor including
the Caption and StatusDescriptions.
For example: Power utilization sensor for Power Supply
1 at PowerSupplySlot=1. StatusDescription
where StatusDescription represents the value of
StatusDescriptions[0]
ElementName Short description of this power utilization sensor using
the name of the power supply displayed by the MP or
iLO.
For example: Power utilization sensor for Power
Supply 1
CIM_Managed SystemElement
OperationalStatus[0] 2 (OK) – if power utilization sensor is operating
properly
StatusDescriptions[0] Description of the status of the power utilization sensor
corresponding to the OperationalStatus.
For example:Power Supply is operating properly – if
OperationalStatus[0] is 2 (OK);
HealthState 5 (OK) – if power utilization sensor is operating
properly
Name Short description of this power utilization sensor using
the name of the power supply displayed by the MP or
iLO and location.
For example: Power utilization sensor for Power
Supply 1 at PowerSupplySlot=1
CIM_LogicalDevice
CreationClassName “SMX_PowerMeter”
DeviceID
Unique identifier for this power utilization sensor
SystemCreationClassName SMX_ComputerSystem.CreationClassName
SystemName SMX_ComputerSystem.Name
CIM_LogicalElement
CIM_EnabledLogicalElement
EnabledDefault 2 (Enabled)
EnabledState 5 (Not Applicable)
RequestedState 12 (Not Applicable)
CIM_Sensor