IML Record Log 394
Table 16-2 Class: SMX_IMLRecordLog
OperationalStatus OperationStatus[0] indicates the highest severity of IML
log entries and will contain one of the following:
2 (OK)— only informational or repaired events exist in
the IML log;
3 (Degraded)— at least one degraded event exists in
the IML log;
6 (Error)— at least one critical event exists in the IML
log.
StatusDescriptions StatusDescriptions[0] will contain one of the following
corresponding to OperationalStatus[0]:
IML log has no critical or degraded events
IML log has at least one degraded event
IML log has at least one critical event
HealthState
5 (OK), when OperationalStatus[0]=2 (OK)
10 (Degraded), when OperationalStatus[0]=3
(Degraded)
20 (Major Failure), when OperationalStatus[0]=6
(Error)
Name “IML record log”
CIM_EnabledLogicalElement
EnabledState 2 (Enabled)
RequestedState 5 (No Change)
EnabledDefault 2 (Enabled)
CIM_Log
MaxNumberOfRecords 0 (Indicates variable length records. There is no
maximum number of records in the IML – there are as
many variable length records as will fit in the IML non-
volatile memory.)
CurrentNumberOfRecords Number of records in the IML log (SMX_IMLLogEntry
instances)
LogState 2 (Normal)
OverwritePolicy 2 (Wraps When Full) The IML entries will fill up
available IML non-volatile memory space until no
room is left. The oldest log entries will then be
deleted as needed to create room for new log
entries.
CIM_RecordLog
InstanceID “HPQ:SMX_IMLRecordLog:1”
HP_CommonRecordLog
TimeOfLastChange Time of last log change
To Next Page
Loading...
Need help?
General