HP StorageWorks 1/8 User Manual

DescriptionSub-code
Connection to slave robotic failed02
Error motor initialization03
Error during gripper
1
close
04
Error slider
2
home positioning
05
Error elevator
3
home movement
06
Error during sled
5
movement to rotation
4
position
07
Error during rotation
4
initialization, get range failed
08
Error elevator
3
init
09
Error during rotation
4
to far position
0A
Error first sled
5
init, move to sensor failed
0B
Error during sled
5
movement to rotation
4
position
0C
Error during rotation
4
to slide position
0D
Error slider
2
init, get range failed
0E
Error during slider
2
forward movement
0F
Error gripper
1
init, get range failed
10
Error during slider
2
home movement
11
Error during rotation
4
to FAR position
12
Error sled
5
init, move to sensor failed
13
Error during sled move — check shipping lock14
Error inventory scan20
Error during gripper
1
close
21
Error slider
2
home movement
22
Error during move gripper
1
to scan pos
23
Error reading bar code label24
HP StorageWorks 1/8 G2 Tape Autoloader User and service guide 143

HP StorageWorks 1/8 Specifications

General

Number of Slots	8
Form Factor	1U
Interface	SCSI / SAS
Drive Type	LTO
Compatibility	Compatible with HP and non-HP servers