DescriptionInformational eventValue
Incorrect key server token PIN enteredBackup initiated on key server token0x14
The backup of the key server token has finished.Backup off key server token finished0x15
A new write key was automatically generated
on the key server token.
A new write key was automatically generated
on the key server token.
0x16
A new write key was manually generated on
the key server token.
A new write key was manually generated on
the key server token.
0x17
More than five attempts were made to set the
key server token with invalid PINs.
More than 5 invalid key server token PIN at-
tempts
0x18
A restore operation was initiated on the key
server token.
Restore initiated on key server token0x19
A restore operation was completed on the key
server token.
Restore off key server token finished0x1A
The key server token is over 90% full.Key server token is over 90% full0x1B
The key server token contains keys that have not
been backed up.
Key server token contains keys that have not
been backed up.
0x1C
Using HP Library & Tape Tools to diagnose problems
With HP Library & Tape Tools installed on the host server you can:
• Identify all parallel SCSI devices connected to your system.
• View detailed configuration, identification, inventory, and drive information for the device.
• Easily update device and drive firmware.
• Run advanced diagnostic tests, including connectivity, read/write, media validation, and testing
the functionality of the device.
• View device and drive error logs.
• Generate a detailed support ticket that can be e-mailed or faxed to your support representative
for analysis.
The HP Library & Tape Tools diagnostic provides an intuitive graphical user interface with integrated
context-sensitive help. It can be downloaded free of charge from http://www.hp.com/support/
TapeTools.
To diagnose problems with L&TT:
1. Run L&TT on the host server. You can install L&TT on the host server, or run it from a CD-ROM or
USB flash drive on the host server.
2. Pull a support ticket for the device.
3. Look at the device analysis results for additional information about the device's operation.
HP StorageWorks 1/8 G2 Tape Autoloader User and service guide 155