HP StorageWorks 1/8 User Manual

3
Elevator: The part of the robotics assembly that moves in the vertical direction.
4
Rotation: The part of the robotics assembly that turns the robot to face each magazine and the drive.
5
Sled: The part of the robotics assembly that moves the robot towards the OCP or back towards the
drive.
Table 34 Device error sub-codes
DescriptionError code
Robotic load not reached Cartridge Present sensor90
No activity after Load command91
Time-out while loading tape92
No activity after load command93
Time-out drive Unload94
Drive terminated unsuccessfully95
Tape not ejected at robot unload96
Slot not free at robot unload97
Cartridge not seated in load phase 198
Drive error codes
Table 35 Drive error codes
DescriptionError code
Drive broken01
Temperature exceeds limit02
Tape error03
Cleaning cartridge is expired04
Drive needs cleaning05
Autoloader lost communication with the drive06
Warning that the tape is nearing its end of life07
HP StorageWorks 1/8 G2 Tape Autoloader User and service guide 147

HP StorageWorks 1/8 Specifications

General

Number of Slots	8
Form Factor	1U
Interface	SCSI / SAS
Drive Type	LTO
Compatibility	Compatible with HP and non-HP servers