HP StorageWorks 1/8 User Manual

DescriptionSub-code
Error during set hold current to avoid torsion46
Preposition to drive failed50
Elevator
3
movement to home sensor failed
51
Sled
5
movement to home sensor failed
52
Error during sled
5
movement to drive position
53
Error during rotation
4
to drive position
54
Error during elevator
3
movement in drive position
55
Error during sled
5
movement to rotation position.
56
Error during rotation to end position.57
Move from/to drive failed60
Error during first slider
2
movement
61
Error during first gripper
1
movement
62
Error during second slider
2
movement
63
Error during second gripper
1
movement, get range failed
64
Error during third slider
2
movement, move home failed
65
Release magazine failed70
Error during sled
5
movement to rotation
4
position
71
Error during rotation
4
to unlock position
72
Error during move sled
5
to block
73
Opening mailslot failed80
Error during movement to mailslot open position81
Error during moving back, sensor was found82
Movement to home position failed90
Elevator
3
movement to home position failed
91
Error during sled
5
movement to rotation
4
position
92
HP StorageWorks 1/8 G2 Tape Autoloader User and service guide 145

HP StorageWorks 1/8 Specifications

General

Number of Slots	8
Form Factor	1U
Interface	SCSI / SAS
Drive Type	LTO
Compatibility	Compatible with HP and non-HP servers