73
1. Enter system view.
system-view
N/A
2. (Optional.) Specify a source
IP address for outgoing FTP
packets.
ftp
client
source
{
interface
interface-type interface-number |
ip
source-ip-address }
By default, no
address is specified, and the
primary IP address of the
output interface is used as
the source IP address.
3. Return to user view.
quit
N/A
4. Log in to the FTP server.
• (Method 1.)
server from user view:
ftp ftp-server [ service-port ]
[ vpn-instance
vpn-instance-name ] [ dscp
dscp-value | source { interface
{ interface-name | interface-type
interface-number } | ip
source-ip-address } ] *
• (Method 2.)
server from FTP client view:
a. ftp
b. open server-address
specified in the
ftp
command
takes precedence over the
one set by the
ftp client
source
command.
To establish an IPv6 FTP connection:
1. Enter system view.
system-view
N/A
2.
source IPv6 address for FTP
client.
ftp
client
ipv6 source
{
interface
interface-type interface-number |
ipv6
source-ipv6-address }
By default, no
address is specified. The source
address is automatically selected
as defined in RFC 3484.
3. Return to user view.
quit
N/A
4. Log in to the FTP server.
• (Method 1.) Log in to the FTP
server from user view:
ftp ipv6 ftp-server
[ service-port ]
[ vpn-instance
vpn-instance-name ] [ dscp
dscp-value | source
{ interface interface-type
interface-number | ipv6
source-ipv6-address } ] * [ -i
interface-type
interface-number ]
• (Method 2.) Log in to the FTP
server from FTP client view:
a. ftp ipv6
b. open server-address
The source IP address specified
in the
ftp ipv6
command takes
precedence over the one set by
the
ftp client ipv6 source
command.
To Next Page
Loading...
Need help?
General