30-676781BE-003 July 2023 3
In the Front panel components, added GPU dense configurations.
In the Riser board components , added GPU riser.
In the Fan and heatsink requirements, added GPU dense
configurations.
Updated the following hardware operation topics for GPU dense
configuration:
Remove the middle cover
Remove the riser cage
Install the riser cage
Install the middle cover
Remove the fan wall
Install the fan wall
System board components
Front I/O cabling
Updated the Drive power cabling topic.
Added the following topics:
GPU riser slot numbering
EDSFF SSD LED definitions
E3.S drive bay numbering
Installing an E3.S drive
Installing the 4 SFF drive cage
Installing the E3.S drive cage
Installing an accelerator in the GPU riser cage
4 SFF drive controller cabling
4 E3.S drive controller cabling
8 E3.S drive controller cabling
GPU riser cabling
HPE 1600 W Flex Slot -48 VDC Hot-plug Power Supply
30-676781BE-002 April 2023 2
In the Installing a processor heatsink assembly topic, added
support for Intel® MCC processors.
In the Fan options topic, added a table for standard fan
configuration.
Added the following topics:
Fan and heatsink requirements
Accelerator options
Installing an accelerator in the rear riser cage
Part numberPart number Publication datePublication date EditionEdition Summary of changesSummary of changes
To Next Page
Loading...
