HSD ES919 NC - Threaded Service Holes

______HSD Technological equipment for Automation _____________________________________
5801H0017 Rev. 02 _________________________________________________________ 42/98
9.3.4 Threaded service holes
There are a number of M6 threaded holes in the electro-spindle body, located as shown in Figure
9.4.
Attention: never to block the silenced exhaust air holes
(Position 4 in Figure 9.4).
4
3
1
2
1
Frontal service holes 6
2
C axis fixing holes 6
3
Side service holes
3 (ES919) per side
2 (ES915) per side
4
Silenced exhaust air hole 1 per side
Figure 9.4 Service holes and silenced exhaust air hole