______HSD Technological equipment for Automation _____________________________________
5801H0017 Rev. 02 __________________________________________________________ 7/98
§ 5 WARNINGS AND SAFETY PRECAUTIONS
5.1 DISTRIBUTION OF THIS MANUAL
This manual contains important instructions and precautions, and must accompany the electro-
spindle at all times since it is essential for the safe operation of the electro-spindle.
Keep this manual safe, and ensure that all persons involved with the electro-spindle know of it and
have access to it.
The safety precautions contained herein are designed to ensure the safety of all persons
exposed to the residual risks associated with the electro-spindle.
The instructions contained herein provide information necessary for the correct operation of the
electro-spindle, as required by the manufacturer.
If any information given in this manual is found to be in conflict with applicable safety regulations,
contact HSD S.p.A. on +39 0721 439612 to request the necessary corrections and/or adaptations.
Make sure that you read and fully understand all the documentation supplied with the electro-
spindle to avoid incorrect operation of the unit and unnecessary risks of personal injury.
Keep this manual in a suitable place near the machine, where it will always be readily available to
operators for consultation.
IMPORTANT: The information given in this manual is essential to
ensure that the electro-spindle is installed and used safely and
correctly.
5.2 GENERAL SAFETY SYMBOLS
In this manual, important instructions or precautions are marked with the following symbols:
WARNING: Identifies situations that could lead to
personal injury.
WARNING: Live electrical parts.
To Next Page
Loading...