HSD ES919 NC - Terms of Warranty

______HSD Technological equipment for Automation _____________________________________
5801H0017 Rev. 02 __________________________________________________________ 6/98
§ 4 TERMS OF WARRANTY
HSD S.p.a. guarantees that this electro-spindle has been QC passed in testing in the factory. HSD
S.p.a. accepts responsibility only for defects in electrical and mechanical parts. The warranty does
not cover defects caused by the normal use of parts subject to continuous or rapid wear (e.g.
seals, belts, bearings, etc.). In particular HSD S.p.a. offers no guarantee as to the duration of
bearings, since bearing wear depends on various factors including: tool balancing precision, type
of machining operation, impacts and/or mechanical stress in excess of the manufacturer’s declared
limits.
HSD S.p.a. declines all responsibility for non-compliance of the electro-spindle caused by failure to
follow the precautions and instructions given in this manual or by improper use or handling of the
electro-spindle. The customer has the right to replacement of all parts shown to be defective,
unless the said defects are caused by unauthorized tampering, including the fitting of non-original
HSD spare parts and/or the replacement of parts not described or authorized in this manual unless
authorized beforehand and in writing by HSD S.p.A..
In no case shall HSD S.p.A. or its suppliers accept any responsibility for damage (including
damage to the unit, damage incurred for lost production and income, down-time in manufacturing,
loss of information or other economic losses) deriving from the use of HSD products, even if HSD
has been advised of such risks in advance.
The warranty becomes automatically null and void if the customer fails to notify HSD S.p.A. in
writing of any faults found in the electro-spindle within 15 days of their occurrence. The warranty
likewise becomes null and void if the customer fails to permit the seller to perform all necessary
checks and tests, and if, when the seller requests the return of a defective part, the customer fails
to do so within two weeks of the request.
Dimensioned drawings and photographs are provided only for information purposes and to
facilitate understanding of text.
HSD S.p.A. has a policy of constant development and improvement, and reserves the right to
make functional and stylistic modifications to its products, to change the design of any functional or
accessory part, and to suspend manufacturing and supply without notice and without obligation to
third parties. Furthermore, HSD S.p.A. reserves the right to make any structural or functional
change to the units, and to change the supply of spare parts and accessories without any prior
notice.