Copyright © Huawei Technologies Co., Ltd.
Figure 5-6 Security certificate problem message
This operation is performed on Windows 7. If another operating system is used, perform this operation
based on actual conditions.
Step 3 Set User Name and Password, and click Log In. The WebUI login page is displayed, as
shown in Figure 5-7.
Figure 5-7 ECC500 WebUI login page
Step 4 Choose Home > Equipment Manage.
Step 5 Select Temp/Hum from the Equipment Type drop-down list box and set device parameters,
as shown in Figure 5-8. Table 2-2 describes the setting methods.
To Next Page
Loading...
