Huawei FusionModule2000 - Page 121

FusionModule2000 Smart Modular Data Center
Product Description
7 Temperature Control System
Issue 06 (2020-05-21)
Copyright © Huawei Technologies Co., Ltd.
113
Figure 7-7 LCD
(1) Indicator
(2) USB
a
(Universal Serial Bus, reserved)
(3) 12 C/12 V (reserved)
(4) DP (display port)
(5) SW (reserved)
a: USB has the following functions:

After installing the WiFi module, locally connect to the smart cooling product over the Service
Expert app. Obtain the initial startup password during deployment. View or obtain the running
information about the smart cooling product during preventive maintenance. Only Huawei service
engineers or authorized service engineers are allowed to use the WiFi module. To ensure security,
remove the WiFi module immediately after use.

Insert the USB flash drive, import and export the configuration file, export run logs, and upgrade
software.
Table 7-11 Indicator and buzzer status description
Alarm Status
Indicators
Buzzer
The device is operating properly, or a
warning alarm occurs.
Green
Silent
The buzzer keeps buzzing if a major
alarm is not confirmed after the
alarm generation.
Yellow
Beeping intermittently
The buzzer keeps buzzing if a critical
alarm is not confirmed after the
alarm generation.
Red
Beeping continuously
Functions

When only one smart cooling product is running, the controller provides logic control of
components in the smart cooling product to adjust the indoor temperature and humidity.