FusionModule2000 Smart Modular Data Center
Product Description
7 Temperature Control System
Copyright © Huawei Technologies Co., Ltd.
Features
The controller provides a touchscreen with a user-friendly interface.
The controller controls the indoor temperature precisely and responds quickly.
The controller is protected by a multi-level password protection mechanism, avoiding
misoperations.
Password verification is required upon the first startup to ensure the system security. No
password verification is required for subsequent startup if the first verification succeeds.
The controller provides multiple protection functions, such as chilled water valve
exception feedback, abnormal power-off self-recovery, and water leakage detection,
ensuring system reliability.
The controller displays the operating status and duration of the smart cooling product
components in real time.
The expert system automatically displays the information of the current fault, which
facilitates the maintenance.
The controller provides abundant external ports such as RS485 ports, CAN ports, FE
ports, and USB ports that are protected by a security mechanism.
The smart cooling product supports communications protocols such as Modbus RTU,
Modbus TCP, and SNMP, facilitating connection to the network management system.
The controller intelligently identifies abnormal parameter settings (incorrect commands)
and rejects them automatically.
If the indoor temperature fluctuates beyond the normal range, an audible and visible
alarm signal is sent automatically.
7.4.4 Technical Specifications
Table 7-20 General specifications
2000 mm x 600 mm x 1200 mm (cabinet dimensions)
2200 mm x 600 mm x 1200 mm (including a top frame)
Net weight/Gross
weight (full
configuration)
CQC, CE, RoHS, REACH, WEEE, and IEC standard
a: Test condition is rated condition (Indoor dry-bulb temperature: 37°C. Relative humidity:
24%. Outdoor temperature: 35°C).
To Next Page
Loading...
Need help?
General