Huawei FusionModule2000 - Access Control System; Access Actuator

FusionModule2000 Smart Modular Data Center
Product Description
8 Intelligent Module Management System
Issue 06 (2020-05-21)
Copyright © Huawei Technologies Co., Ltd.
175
8.3.8 Access Control System
8.3.8.1 Access Actuator
The access actuator is the control component for the aisle door in a smart module. It connects
to the ECC800-Pro controller over FE port, wireless networking (802.15.4). It opens the
magnetic lock by detecting the card swiping information of the card reader, door open button
information, and fire linkage information. It has access right management, access event record,
and alarm record functions.
Figure 8-31 Access actuator
(1) 48 V power port
(2) POE port
(3) RS485 port COM2
(4) RS485 port COM1
(5) Address DIP switch
(6) Status indicator
(7) BLINK button
(8) WG_2 Wiegand
interface
(9) WG_1 Wiegand interface
(10) AI/DI_2 dry
contact (Reserved port
for linkage control or
third-party fire
extinguishing system
dry contacts)
(11) AI/DI_1 dry
contact (Reserved port
for exit button)
(12) LOCK/GND/GATE/COM door
status or magnetic lock port