Huawei FusionModule2000 Product Description

FusionModule2000 Smart Modular Data Center
Product Description
8 Intelligent Module Management System
Issue 06 (2020-05-21)
Copyright © Huawei Technologies Co., Ltd.
144
8.3 Key Hardware Devices
8.3.1 ECC800-Pro Core Controller
8.3.1.1 Product Configuration
The ECC800-Pro data center controller is used to monitor the devices and environment in the
smart module. It consists of the power module and main control module. You can insert and
remove the power module.
You can configure the ECC800-Pro collector in the following two manners:
Configuration 1 (typical configuration): one power module and one main control module
Configuration 2: two power modules and one main control module.

In configuration 1, install a filler panel in slot 2.

In configuration 2, install power modules in slots 1 and 2.
Figure 8-11 ECC800-Pro collector in configuration 2
(1) Slot 1: power modules
(2) Slot 2: power modules
(3) Slot 3: main control module
Table 8-1 ECC800-Pro environmental specifications
Item
Specifications
Working temperature
–20°C to +50°C
Storage temperature
–40°C to +70°C
Relative humidity
5%–95% RH (non-condensing)
Altitude
0–4000 m (When the altitude is between 3000 m and 4000 m,
the temperature decreases by 1°C for each additional 200 m.)
Table 8-2 ECC800-Pro structural specifications
Item
Specifications
Dimensions (L x W x H)
442 mm × 330 mm × 43.6 mm
Weight
7.5 kg (dual power supplies + main control

Huawei FusionModule2000 Specifications

General

Brand	Huawei
Model	FusionModule2000
Category	Storage
Language	English