Huawei FusionModule2000 Product Description

FusionModule2000 Smart Modular Data Center
Product Description
8 Intelligent Module Management System
Issue 06 (2020-05-21)
Copyright © Huawei Technologies Co., Ltd.
191
8.3.10.1 AC Actuator
The AC actuator is used in a smart module to control the lighting inside the smart module by
receiving commands from the access control system or host, infrared linkage information
(disabled by default), or signals from the light button. It also provides a charging port for the
pad.
Figure 8-44 AC actuator
(1) AC OUT2 port
(2) AC OUT1 port
(3) AC IN port
(4) Status indicator
(5) BLINK button
(6) AI/DI dry
contact
(7) COM1–2 RS485
port
Specifications
Table 8-58 AC actuator technical specifications
Item
Specifications
Power input
One AC input, 100–240 V AC.
Power output

AC OUT1: two AC outputs, 100–240 V AC, maximum total
current: 5 A.

AC OUT2: one AC output, 100–240 V AC, maximum
current: 5 A.
Wireless
One wireless communication port, complying with

Huawei FusionModule2000 Specifications

General

Brand	Huawei
Model	FusionModule2000
Category	Storage
Language	English