Huawei RH2288H V3 - 6 Software and Configuration Utility; 6.1 BIOS

Procedure
Restart the server.
1. Click on the menu bar of the Remote Virtual Console.
For details about how to log in to the Remote Virtual Console, see 9.7
Opening the Remote Virtual Console.
2. Select Reset.
The system displays "Are you sure to perform this operation?"
3. Click Yes.
The server restarts.
4. Press Delete repeatedly when the screen shown in the following
gure is
displayed during server startup.
NO TE
You can also press the following shortcut keys on the BIOS startup screen as required:
● Press F5 to select the keyboard type (English,American or French keyboard).
● Press Delete or F4 to go to the BIOS Setup Utility screen.
● Press F11 or F3 to go to the boot manager screen for selecting boot options.
● Press F12 to boot from the network.
Figure 5-8 BIOS startup screen
5. Enter a BIOS password when prompted. The screen for setting the BIOS is
displayed.
RH2288H V3 Server
User Guide 5 Conguring the RH2288H V3
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 130