Huawei RH2288H V3 - 9.7 Opening the Remote Virtual Console

9 Common Operations
9.1 Querying the IP Address of the Management Network Port
9.2 Logging In to the iBMC WebUI
9.3 Logging In to the iBMC CLI
9.4 Logging In to the Server Using the Independent Remote Console
9.5 Logging In to the Server over a Serial Port Using PuTTY
9.6 Logging In to the Server over a Network Port Using PuTTY
9.7 Opening the Remote Virtual Console
9.8 Querying the Mapping Between NVMe Drive Letters, Slot IDs, and Bus IDs in
Linux
9.9 Erasing Storage Media Data
9.1 Querying the IP Address of the Management
Network Port
Methods
You can query the management network port IP address using any of the
following methods:
● If the IP address of the management network port is not changed, the default
IP address of the management network port is used. For details, see Table
9-1.
● Use the BIOS. For details, see this section.
● Use the iBMC CLI. Run the ipmcget -d ipinfo command to
congure the
management network port IP address. For details, see Huawei Rack Server
iBMC User Guide
.
● Query the management IP address on the LCD.
RH2288H V3 Server
User Guide 9 Common Operations
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 302