Huawei RH2288H V3 - Powering off the Server

Figure 4-1 Power Control page
Step 3 Click Power On. In the displayed dialog box, click Yes to power on the server.
----End
Verication
Check the indicator status after the server is powered on.
4.2 Powering O the Server
Power o the server using the iBMC WebUI. After the power-o, all services and
programs running on the server will stop running. Stop all services and programs
or switch them to other servers before powering
o the server. Before powering
o the server, you need to obtain the IP address of the iBMC management
network port, and the user name and password for logging in to the iBMC WebUI.
For details about how to obtain the IP address for the management network port
and how to operate the iBMC, see
Huawei Rack Server iBMC User Guide .
RH2288H V3 Server
User Guide 4 Powering On and O the Server
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 118