Huawei RH2288H V3 - Installing the Internal USB Flash Drive

Figure 7-58 Removing the internal USB ash drive (USB 3.0 port for the service
system)
Step 8 Place the removed USB ash drive in an ESD bag.
----End
7.28 Installing the Internal USB Flash Drive
Install a USB
ash drive to replace the original one.
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Remove the USB ash drive to be replaced. For details, see 7.27 Removing the
Internal USB Flash Drive.
Step 3 Take the spare USB
ash drive out of its ESD bag.
Step 4 Insert the USB ash drive into the upper USB port. See Figure 7-59 and Figure
7-60.
NO TE
The lower USB port is unavailable.
RH2288H V3 Server
User Guide 7 Replacing Parts
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 199