Step 10 Connect all external cables such as power and network cables. For details, see 3.5
Connecting External Cables.
Step 11 Power on the RH2288H V3. For details, see 4.1 Powering On the Server.
----End
7.59 Removing the VGA Board
Remove the video graphics array (VGA) board if it has failed.
With Eight 3.5-inch Hard Disks
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Determine the cabinet number and chassis number of the server, and label its
panel to prevent misoperations.
Step 3 Power o the RH2288H V3. For details, see 4.2 Powering O the Server.
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the RH2288H V3 and put it on an ESD desktop. For details, see 3.6
Removing the Server.
Step 6 Remove the chassis cover. For details, see 7.11 Removing the Chassis Cover.
Step 7 Remove the air duct. For details, see 7.13 Removing the Air Duct.
Step 8 Remove all fan modules. For details, see 7.15 Removing a Fan Module.
Step 9 Press and hold down the latches on both sides of a fan module bracket, and lift
the bracket. Use the same method to lift the other fan module bracket. See steps
(1) and (2) in Figure 7-145.
Figure 7-145 Removing fan module brackets
RH2288H V3 Server
User Guide 7 Replacing Parts
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 277
To Next Page
Loading...
