Figure 7-161 Installing fan module brackets
Step 9 Install the fan modules. For details, see 7.16 Installing a Fan Module.
Step 10 Install the air duct. For details, see 7.14 Installing the Air Duct.
Step 11 Install full-height full-length riser cards if they are required. For details, see 7.20
Installing a Riser Card.
Step 12 Install the chassis cover. For details, see 7.12 Installing the Chassis Cover.
Step 13 Install the RH2288H V3. For details, see 3.4 Installing the Server.
Step 14 Connect all external cables such as power and network cables. For details, see 3.5
Connecting External Cables.
Step 15 Power on the RH2288H V3. For details, see 4.1 Powering On the Server.
----End
7.65 Removing the Right Mounting Ear
Remove the right mounting ear if it has failed.
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Determine the cabinet number and chassis number of the server, and label its
panel to prevent misoperations.
Step 3 Power
o the RH2288H V3. For details, see 4.2 Powering O the Server.
Step 4 Remove all external cables such as power and network cables.
RH2288H V3 Server
User Guide 7 Replacing Parts
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 292
To Next Page
Loading...
