Step 3 Power o the RH2288H V3. For details, see 4.2 Powering O the Server.
Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the RH2288H V3 and put it on an ESD desktop. For details, see 3.6
Removing the Server.
Step 6 Remove the chassis cover. For details, see 7.11 Removing the Chassis Cover.
Step 7 Remove the cables from the M.2 SSD riser card. For details, see 2.7.1 Internal
Cabling for an M.2 SSD Riser Card.
Step 8 Remove the M.2 SSD riser card.
● For details about how to remove an M.2 SSD riser card from the mainboard,
see 7.21.2 Removing a PCIe Card from the Mainboard.
● For details about how to remove an M.2 SSD riser card from a riser card, see
7.21.1 Removing a PCIe Card from a Riser Card.
Step 9 Loosen the screw on the M.2 SATA SSD card using an M3 Phillips screwdriver. See
step (1) in Figure 7-168.
Figure 7-168 Removing an M.2 SATA SSD card
Step 10 Lifting the M.2 SATA SSD card at a 20° to 30° angle upwards, pull it out. See step
(2) in Figure 7-168.
Step 11 Place the removed M.2 SATA SSD card in an ESD bag.
----End
7.68 Installing an M.2 SATA SSD Card
Install an M.2 SATA SSD card to replace the faulty one.
RH2288H V3 Server
User Guide 7 Replacing Parts
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 298
To Next Page
Loading...
