Figure 7-105 Installing a FlexIO card
Step 6 Tighten the two screws using the Phillips screwdriver to secure the FlexIO card.
See (2) in Figure 7-105.
Step 7 Connect the cables to the FlexIO card.
Step 8 Install the I/O module. For details, see 7.22 Installing a PCIe Card.
Step 9 Install the chassis cover. For details, see 7.12 Installing the Chassis Cover.
Step 10 Install the RH2288H V3. For details, see 3.4 Installing the Server.
Step 11 Connect all external cables such as power and network cables. For details, see 3.5
Connecting External Cables.
Step 12 Power on the RH2288H V3. For details, see 4.1 Powering On the Server.
----End
7.47 Removing the LCD
Remove the LCD if it has failed.
RH2288H V3 Server
User Guide 7 Replacing Parts
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 244
To Next Page
Loading...
