Figure 7-64 Removing the RAID controller card
Step 12 Lift the RAID controller card slowly out of the server. See step (2) in Figure 7-64.
Step 13 Place the removed RAID controller card in an ESD bag.
----End
7.32 Installing a Screw-in RAID Controller Card
Install a screw-in RAID controller card to replace the original one.
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Remove the RAID controller card to be replaced. For details, see 7.31 Removing
the Screw-in RAID Controller Card.
Step 3 Take the spare RAID controller card out of its ESD bag.
Step 4 (Optional) Remove the rubber plugs from the ports on the RAID controller card if
any. See Figure 7-65.
RH2288H V3 Server
User Guide 7 Replacing Parts
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 205
To Next Page
Loading...
