Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the RH2288H V3 and put it on an ESD desktop. For details, see 3.6
Removing the Server.
Step 6 Remove the chassis cover. For details, see 7.11 Removing the Chassis Cover.
Step 7 Remove full-height full-length riser cards if they are installed. For details, see 7.19
Removing the Riser Card.
Step 8 Remove the supercapacitor if it is installed. For details, see 7.35 Removing the
Supercapacitor (Screw-in RAID Controller Card).
Step 9 Determine the position of the RAID controller card. See Figure 7-63.
Figure 7-63 Position of the RAID controller card
Step 10 Hold down the latches on the cables to the RAID controller card, and remove the
cables from the RAID controller card. For details, see 2.7 Internal Cabling.
Step 11 Loosen the screws on the RAID controller card. See step (1) in Figure 7-64.
RH2288H V3 Server
User Guide 7 Replacing Parts
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 204
To Next Page
Loading...
