Huawei RH2288H V3 - Setting the Management Network Port IP Address

▪ Digits
– Cannot be the same as the user name or user name in reverse order.
----End
5.7 Setting the Management Network Port IP Address
Set the management network IP address through the iBMC WebUI, BIOS, and LCD
of the iBMC. You can also run the ipaddr command on the iBMC CLI to set the IP
address of the management network port. For details, see
Huawei Rack Server
iBMC User Guide .
Table 5-5 lists the default data for setting the management network IP address.
Table 5-5 Default information
Item Name Default Value
iBMC
manageme
nt network
port data
IP address
and subnet
mask
● IP address: 192.168.2.100
● Subnet mask: 255.255.255.0
iBMC login
data
User name
and
password
● User name: root
● Password: Huawei12#$
BIOS Password The default BIOS password is Huawei12#$ for the
American keyboard, Huqzei&é34 for the French
keyboard, and Huawei12£$ for the English
keyboard.
NOTE
When entering the BIOS password on the Remote Virtual
Console:
● If the keyboard type
congured in the OS is the same
as the actual keyboard type, enter the password by
using the actual keyboard.
● If the keyboard type
congured in the OS is dierent
from the actual keyboard type, enter the password by
using the keyboard congured in the OS.
Procedure
● Set the IP address of the management network port on the iBMC WebUI.
a. Log in to the server iBMC WebUI.
For details, see 9.2 Logging In to the iBMC WebUI.
b. Choose Cong > Network Settings.
The Network Settings page is displayed.
c. Set an IP address for the management network port, as shown in Figure
5-17.
RH2288H V3 Server
User Guide 5 Conguring the RH2288H V3
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 138