Figure 5-17 Setting an IP address for the management network port
d. Click Save.
No further action is required.
● Set the IP address in the BIOS.
a. Click on the menu bar of the Remote Virtual Console.
For details about how to log in to the Remote Virtual Console, see 9.7
Opening the Remote Virtual Console.
b. Select Reset.
The system displays "Are you sure to perform this operation?"
c. Click Yes.
The server restarts.
d. Press Delete repeatedly when the screen shown in the following
gure is
displayed during server startup.
Figure 5-18 BIOS startup screen
RH2288H V3 Server
User Guide 5 Conguring the RH2288H V3
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 139
To Next Page
Loading...
