Step 15 Place the removed left mounting ear in an ESD bag.
----End
7.64 Installing the Left Mounting Ear
Install a left mounting ear to replacing the faulty one.
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Remove the left mounting ear to be replaced. For details, see 7.63 Removing the
Left Mounting Ear.
Step 3 Take the spare left mounting ear out of its ESD bag.
Step 4 Route the mounting ear signal cable through the chassis in the arrow direction.
See step (1) in Figure 7-160.
Figure 7-160 Installing the left mounting ear
Step 5 Connect the mounting ear signal cable to the left mounting ear connector (J42)
on the mainboard. See step (2) in Figure 7-160.
Step 6 Install the mounting ear in the arrow direction. See step (3) in Figure 7-160.
Step 7 Tighten the screws on the left mounting ear. See step (4) in Figure 7-160.
Step 8 Install the fan module brackets in the chassis. See Figure 7-161.
RH2288H V3 Server
User Guide 7 Replacing Parts
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 291
To Next Page
Loading...
