Huawei RH2288H V3 - Page 145

Figure 5-10 Boot Type Order
Select PXE as a boot option.
9. Select boot options to be congured, and press + or - to change the boot
sequence. Set the
rst boot option to PXE.
The option at the top of the boot option list is the rst boot option, and the
one at the bottom is the last boot option.
– To move a boot option up, press +.
– To move a boot option down, press -.
Enable the PXE function for a network port.
10. Choose Advanced > PXE
Conguration and press Enter.
The PXE Conguration screen is displayed, as shown in Figure 5-11.
NO TE
The PXE Conguration screen displays four network ports, in which PXE1 is Enabled
and other network ports are Disabled by default.
RH2288H V3 Server
User Guide 5 Conguring the RH2288H V3
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 132