Huawei RH2288H V3 - Page 34

Table 2-5 Indicators and buttons on the front panel
Silkscreen Meaning State Description
Fault diagnosis
LED
● ---: The server is operating properly.
● Error code: A fault occurs in server
hardware.
For details about error code, see
Huawei Rack Server iBMC Alarm
Handling
.
Power button/
indicator
● O: The server is not connected to a
power source.
● Blinking yellow: The iBMC is starting.
● Steady yellow: The server is ready to
power on.
● Steady green: The system is properly
powered on.
NOTE
● When the server is powered on, you can
press this button to shut down the OS.
● When the server is powered on, you can hold
down this button for 6 seconds to force the
server to power
o.
● When the server is ready to power on, you
can press this button to start the server.
UID button/
indicator
The UID button/indicator helps identify and
locate a server in a cabinet. You can turn
on or o the UID indicator by pressing the
UID button or remotely running a
command on the iBMC CLI.
● Steady blue: The server is being located.
●
O: The server is not being located.
NOTE
● You can press this button to turn on or
o
the UID indicator.
● You can press and hold down this button for
4 to 6 seconds to reset the iBMC.
Health status
indicator
● Steady green: The server is operating
properly.
● Blinking red at 1 Hz: A major alarm is
generated.
● Blinking red at 5 Hz: A critical alarm is
generated
RH2288H V3 Server
User Guide 2 Overview
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 21