EasyManua.ls Logo

Huawei RH2288H V3 - Page 84

Huawei RH2288H V3
350 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Item Specications
Memory Up to 24 DDR4 DIMM slots (12 DIMMs per CPU) for
installing either RDIMMs or LRDIMMs
Maximum memory speed: 2400 MT/s
24 x 32 GB RDIMMs for two CPUs, with a maximum
memory capacity of 768 GB
24 x 128 GB LRDIMMs for two CPUs, with a maximum
memory capacity of 3072 GB
Memory protection technologies: Error Checking and
Correction (ECC), memory mirroring, Single Device Data
Correction (SDDC), memory sparing, and lockstep
NOTE
DIMMs of
dierent types (RDIMMs and LRDIMMs) and specications
(such as the capacity, bit width, rank, and height) cannot be installed
in one server. That is, all DIMMs on one server must have the same
BOM number. To query the BOM numbers of DIMMs, use
Computing Product Compatibility Checker.
Storage Multiple drive conguration specications are provided.
For details, see 2.1 Introduction.
Built-in storage:
Two miniSSDs (SATADOMs)
Two SD cards
NOTE
The SD card controller integrated on the mainboard groups the two
SD cards into a RAID 1 array to improve data security.
Drives are hot-swappable.
The server supports RAID 0, 1, 10, 1E, 5, 50, 6, and 60. It
protects cache data from power failures, and supports
RAID level migration, drive roaming, self-diagnosis, and
web-based remote
conguration.
The mainboard can be congured with a SAS or SAS RAID
controller card (with a maximum of 2 GB cache) to
improve hard disk storage performance and ensure user
data security.
The RAID controller card does not occupy a standard PCIe
slot, improving system scalability.
NOTE
If the server is equipped with 12 drives, you can install two or
four 2.5-inch SAS HDDs, SATA HDDs, and SSDs or 3.5-inch SAS
HDDs and SATA HDDs at the rear of the server to expand the
local storage capacity.
If the server is equipped with 25 drives, you can install three 2.5-
inch SAS HDDs, SATA HDDs, and SSDs at the rear of the server to
expand the local storage capacity.
If SATADOM SoftRAID is used when NVMe PCIe SSDs are
congured, only the Legacy mode can be selected for the BIOS.
RH2288H V3 Server
User Guide 2 Overview
Issue 46 (2022-12-28) Copyright © Huawei Technologies Co., Ltd. 71

Table of Contents

Related product manuals