(3) Generating an instance
Generate an instance of function block definitions in the ladder section window.
[1] In the same condition as in (2) (PLC is offline), move the cursor to the location in the ladder section window where
you want to generate an instance, and press the “F” key. The window to call a new function block opens.
[2] Perform the following operations in the function block call window:
In “FB Instance (I),” enter the name you want to assign to the FB (any
name).
In “FB Definitions (D),” select the function block definitions (RBNET_RW)
that have been imported.
Click OK.
[3] An instance is created as follows.
Bring the cursor to the
location where you want to
generate an instance.
To Next Page
Loading...
