IBM 7029 6C3 - P72 17 Display, P92 19 Display, and P202 21 Display

P72 17″ Display, P92 19″ Display, and P202 21″ Display
P72 17″ display with a maximum viewable image size of 407 mm (16.0 inches) measured diagonally.
P92 19″ display with a maximum viewable image size of 456 mm (17.9 inches) measured diagonally.
P202 21″ display with a maximum viewable image size of 503 mm (19.8 inches) measured diagonally.
Dimensions
P72 display
Height 441 mm 17.4 in
Width 408 mm 16.1 in
Depth 434 mm 17.1 in
P92 display
Height 478 mm 18.8 in
Width 462 mm 18.2 in
Depth 476 mm 18.7 in
P202 display
Height 513 mm 20.2 in
Width 498 mm 19.6 in
Depth 500 mm 19.7 in
Weight
P72 19.2 kg 43.2 lbs
P92 25.0 kg 56.3 lbs
P202 31.0 kg 70.0 lbs
Electrical
Voltage range (V ac) 100 to 240
Frequency (hertz) 50 or 60
Power requirements
(typical)
P72=120 watts, P92=140 watts, P202=160 watts
Maximum altitude 3048 m (10000 ft.)
Temperature
Requirements
Operating
10 to 40°C
(50 to 104°F)
Non-Operating
0 to 60°C
(32 to 140°F)
Humidity
Requirements
Operating Non-Operating
(Noncondensing) 10 to 80 % 5 to 95 %
Noise Emissions* Operating Idle
L
WAd
4.5 bels 4.5 bels
Clearances Front Back Left Right
152mm (6 in) 152mm (6 in) 152mm (6 in) 152mm (6 in)
Service Install so that air vents are not blocked.
* See “Noise Emission Notes” on page 336 for definitions of noise emissions positions.
Chapter 4. Physical Characteristics of Displays 225