Specify-Feature Codes for Power Cords
The 98xx specify-feature codes are used to provide power from wall-type outlets to external I/O devices
like RANs or displays. These power cords do not work with rack PDUs. To provide power from a rack PDU
to an external I/O device like the rack-status beacon, order power-cord-feature code 6095.
The following table lists specify-feature codes for power cords that provide power from a rack PDU to the
system. All of the power cords listed in the table are 4 M (13.1 ft.) long except feature code 9910, which is
3 M (10.0 ft.) long.
Feature Code Plug
Standard Compliance or
Type
Countries
9900
NEMA WD-1
5-15P
125 V, 15 A
United States, Canada
9901
CEE7 VII
250 V, 16 A
Belgium, Finland, France
9902
NORMBLAD 4
250 V, 10 A
Denmark
9903
BS 13634
250 V, 13 A
United Kingdom, Others
9904
SII-32-1971
250 V, 16 A
Israel
9905
SEV 1011.1959
250 V, 10 A
Switzerland
9906
SABS 164
BS 546
250 V, 16 A
India, Pakistan, South Africa
9907
CEI 23-16/VII
250 V, 10 A
Italy
346 Site and Hardware Planning Information
To Next Page
Loading...
