IBM i Series

iSeries and AS/400e Servers 71
iSeries and AS/400e Servers
General note: Capacities shown may require prerequisites. Some combinations of features
may not be valid.
Note 4: One line is used if the #5544 System Console on Operations Console is used. One line might be used if the
#5546 or #5548 System Console on LAN is selected and the #0367 Operations Console Cable is connected.
Note 5: This interactive CPW value of 0 represents the amount of 5250 processing capability available for customer
applications. CPW=0 supports system administration functions performed by:
• A single interactive job
• Operations Navigator
• Any job submitted to batch
Multiple system administrators performing simultaneous tasks is not supported.
There is no Interactive Feature Code card for the base interactive #1516. Interactive performance is included
in the base. The #2248 comes with the #1517 only.
Note 6: There must be one CD-ROM or DVD-RAM per system.
Note 7: External DASD maximum assumes 35.16 GB LUNs. External DASD cannot exceed the maximum system
capacity or the maximum number of disk arms.
Note 8: Processor Group is determined by a combination of the Processor and Interactive Feature. The following table
provides a cross reference.
Processor Interactive Feature Processor Feature Processor Group
#2248 #1517 #22A2 P05
#2250
#1516 #22A4 P10
#1518 #22A5 P10
#2252
#1516 #22A7 P10
#1519 #22A8 P10
#2253
#1516 #22AA P20
#1520 #22AB P20
#2422 n/a #2422 P05
#2423 n/a #2423 P05
#2424 n/a #2424 P10
#2431 #1518 #23E7 P10
#2432
#1516 #23F0 P10
#1519 #23F1 P10
#2434
#1516 #23F0 P10
#1519 #23F1 P10
#2452 n/a #2452 P05
#2454 n/a #2454 P10