IBM System/360 20 - 053

• If SYSIPT refers to the same card reader
as SYSRDR, insertion of 1/ CATAL state-
ments is not reguired since every phase
retrieved is already preceded by a II
CATAL control statement. Howeve~, the
last card of the deck must be the II END
statement and can be retrieved from item
6 of the distribution tape.
Figure 15 shows the arrangement of the
input to the CMAINT program. By placing
ASSGN and CONFG control statements behind
the Basic Monitor lrogram, and before the
first END statement, standard device as-
signments and the storage-capacity specifi-
cation can be changed when the Easic Mon-
itor program is replaced.
Updating of the macro definitions is ident-
ical to the procedure described in the sec-
tion lnE~~!ing_l]]~~QEElled~~~~£2_in_!h~
~2~£Q_1i~~2~~·
Creation and Maintenance of System Tapes 53