IBM z13s User Manual

Chapter 11. Hardware Management Console and Support Elements 431
򐂰 Automate/Advanced Management suite
Advanced Management functions for IBM System x blades delivers a workload definition
and performance policy monitoring and reporting. The Automate function adds
goal-oriented resource monitoring management and energy management for CPC
components such as System x blades, POWER7 Blades, and the IBM DataPower XI50z.
This function is in addition to the Advanced Management function.
Table 11-3 lists the feature codes that must exist to enable Unified Resource Manager. To get
ensemble membership, ensure that you also have FC 0025 for the zBC12.
Table 11-3 Unified Resource Manager feature codes and charge indicators
APIs for the Unified Resource Manager
The API is a web-oriented programming interface that makes the underlying Unified
Resource Manager capabilities available for use by higher-level management applications,
system automation functions, and custom scripting. The functions that are available through
the API support several important usage scenarios. These scenarios are in virtualization
management, resource inventory, provisioning, monitoring, automation, workload-based
optimization, and so on.
The Web Services API consists of two major components that are accessed by customer
applications through Internet Protocol network connections with the HMC.
For more information about the API and the Unified Resource Manager, see z Systems
Hardware Management Console Web Services API (Version 2.13.1), SC27-2634, and IBM
zEnterprise Unified Resource Manager, SG24-7921.
Restriction: No new features can be ordered for IBM z Unified Resource Manager with
IBM z13s servers.
Unified Resource Manager
managed component
Manage
a
(per
connection)
a. Yes = charged feature, N/C = no charge, N/A = not applicable. All components
are either managed through the Manage suite or the Automate/Advanced
Management suite. The Automate/Advanced Management suite contains the
functions of the Managed suite.
Automate
a
(per
connection)
Base features FC 0019
b
- N/C
b. FC 0019 is a prerequisite for FC 0020, FC 0184, and FC 0178.
FC 0020
c
- N/C
c. FC 0020 is a prerequisite for FC 0185 and FC 0183.
d. All these feature codes are now associated to the zBX Model 004.
POWER7 blade FC 0178
d
- Yes FC 0179
d
- Yes
DataPower blade FC 0184
d
- Yes FC 0185
d
- N/C
IBM System x blades FC 0182
d
- Yes FC 0183
d
- Yes
(also covers the
previous Advanced
Management function)

IBM z13s Specifications

General

Brand	IBM
Model	z13s
Category	Server
Language	English