TROUBLESHOOTING
20-2
D While operating GPS Logger
PROBLEM POSSIBLE CAUSE SOLUTION REF.
Position data cannot be re-
ceived.
• “External GPS” is selected in the GPS
Set item on the Menu screen, but an ex-
ternal GPS receiver is not connected.
• “OFF” or “Manual” is selected in the
GPS Set item on the Menu screen.
• A GPS signal was not received.
• Connect an external GPS receiver.
• Select either “Internal GPS” or “Exter-
nal GPS” in the GPS Set item on the
Menu screen.
• Move until the GPS signal is received.
p. 10-2
p. 10-2
—
While operating D-STAR (Continued) D
PROBLEM POSSIBLE CAUSE SOLUTION REF.
The simplex operation can-
not be made in the DR
mode.
• A call sign is programmed in “CALL
SIGN” of the Repeater list.
• Duplex mode (DUP+, DUP–) is set.
• A repeater frequency is programmed.
• Delete the Call sign in “CALL SIGN”
setting of the Repeater list.
• Select “OFF” in “DUP” setting of the
repeater list.
• Set a simplex frequency.
p. 9-26
p. 9-29
p. 9-27
The digital code squelch
(CSQL) is impossible.
• The wrong digital code is set. • Set the correct digital code.
p. 9-20
You don’t know how to up-
date the repeater list.
— • See “Updating the repeater list” to
check.
p. 2-13
To Next Page
Loading...
Need help?
General
