Inficon Micro GC Fusion 2-Module User Manual

8 | Front Panel Operation INFICON
152 / 319 074-594-P1H Micro GC Fusion Operating Man-
ual
8.4 Run a Loaded Method or Sequence
Perform the following steps to run a loaded method or sequence from the
Micro GC Fusion front panel display:
1
Ensure the desired method or sequence is loaded. If not, load the desired
method or sequence by following the steps in Select and Load a Method or
Sequence [}151].
2
Tap the green
RUN
button to begin a sample run.
3
The
RUN
button displays
Running
and the process of the run is indicated by the
movement of the blue band on the circumference of the button.
4
Once the run is completed and the starting method conditions are met, the green
RUN
button reappears.

Inficon Micro GC Fusion 2-Module Specifications

General

Brand	Inficon
Model	Micro GC Fusion 2-Module
Category	Measuring Instruments
Language	English