Inficon Micro GC Fusion 2-Module User Manual

5 | Product Overview INFICON
54 / 319 074-594-P1H Micro GC Fusion Operating Man-
ual
5.13 Micro GC Fusion and GC Module Part Numbers
5.13.1 2-Module Micro GC Fusion Part Number
A 2-module Micro GC Fusion can be configured with one or two GC modules. The
figure below shows how a Micro GC part number is constructed.
•
"F" prefix
: a fixed prefix - this is the same for every instrument
•
Chassis Option
: a five digit number that identifies sample inlet, carrier gas
connection, number of GC modules, Integrated Sample Conditioner, AUX I/O,
power cord and factory checkout gas type
•
Number for Module A
: a three digit number that specifies injector type, column
type and length, detector type, and venting connector type
•
Number for Module B
: a three digit number that specifies injector type, column
type and length, detector type, and venting connector type
At least one module must be specified for a system. The module (part)
number for Module B is only specified when Module B is configured.
5.13.2 4-Module Micro GC Fusion Part Number
A 4-module Micro GC Fusion can be configured with three or four GC modules. The
figure below shows how a Micro GC part number is constructed.
•
"F" prefix
: a fixed prefix - this is the same for every instrument

Inficon Micro GC Fusion 2-Module Specifications

General

Brand	Inficon
Model	Micro GC Fusion 2-Module
Category	Measuring Instruments
Language	English