INFICON Software Operation | 9
074-594-P1H Micro GC Fusion Operating Manual 161 / 319
9.4 Method Development
Methods can be created, copied, and edited from the Methods/Sequences window.
1
Click the icon.
2
Click
Methods/Sequences
. A list of methods is displayed.
Item Name Function
1 Name column Displays the user defined methods and sequences
2 Preset Allows selection of pre-defined method and sequence names
to be displayed on the main page
3 Front Panel
Preset
Allows selection of pre-defined method and sequences
names to be displayed on the front panel display
The table below illustrates the icons for method and sequence options.
Item Name Function
Add Method or
Sequence
Allows for the creation of a method or sequence
Edit Edits selected method
Copy Copies selected method
Delete Deletes selected method
Calibrate Displays the calibration interface
Bakeout Sets a column bakeout for a desire duration in minutes
Import Method Imports a method from a computer onto Micro GC Fusion
Export Method Exports the selected method to the computer
To Next Page
Loading...
