Inficon Micro GC Fusion 2-Module

INFICON Product Overview | 5
074-594-P1H Micro GC Fusion Operating Manual 55 / 319
•
Chassis Option
: a five digit number that identifies sample inlet, carrier gas
connection, number of GC modules, Integrated Sample Conditioner, AUX I/O,
power cord and factory checkout gas type
•
Number for Module A
: a three digit number that specifies injector type, column
type and length, detector type, and venting connector type
•
Number for Module B
: a three digit number that specifies injector type, column
type and length, detector type, and venting connector type
•
Number for Module C
: a three digit number that specifies injector type, column
type and length, detector type, and venting connector type
•
Number for Module D
: a three digit number that specifies injector type, column
type and length, detector type, and venting connector type
At least three modules must be specified for a system. The module (part)
number for Module D is only specified when Module D is configured.
5.13.3 GC Module Part Number
The figure below shows how a GC module replacement part number is constructed.
•
"GCMR" Prefix:
a fixed prefix that identifies a GC module replacement
•
Module Number
: a three digit number that specifies injector type, column type and
length, detector type, and venting connector type