Inficon Micro GC Fusion 2-Module User Manual

INFICON Checkout Gas Chromatograms | 14
074-594-P1H Micro GC Fusion Operating Manual 311 / 319
14 Checkout Gas Chromatograms
14.1 Introduction
Standard checkout gases are used in the factory to validate the chromatography
performance of Micro GC Fusion. Chromatograms created with these checkout gases
on Micro GC Fusion columns are provided in this chapter to demonstrate typical peak
elution order, when these checkout gases are used at the customer site during
product acceptance.
Actual retention times and area counts will vary from column to column.
The following column types are included in this chapter:
• Rt-Msieve 5A, see 10 m Rt-Msieve 5A [
}312]
• Rt-Q-Bond, see 12 m Rt-Q-Bond [}314]
• Rxi-1ms, see 10 m Rxi-1ms [}316]
For a complete list of checkout gases and the corresponding concentrations, see
Checkout Gases [}301].

Inficon Micro GC Fusion 2-Module Specifications

General

Brand	Inficon
Model	Micro GC Fusion 2-Module
Category	Measuring Instruments
Language	English