Inficon Micro GC Fusion 2-Module

7 | Connecting to a Sample INFICON
146 / 319 074-594-P1H Micro GC Fusion Operating Man-
ual
7.7 Sampling Using the Gas-Liquid Separator
The gas-liquid separator provides gas-liquid separation through a Genie filter. Refer to
Installing the Gas Liquid Separator [
}74] for the device installation procedure.
CAUTION
Sample inlet gas pressure must be less than 172 kPa (25 psi). Exceeding 172
kPa (25 psi) will damage Micro GC Fusion and require factory repair.