Inficon Micro GC Fusion 2-Module

INFICON Software Operation | 9
074-594-P1H Micro GC Fusion Operating Manual 169 / 319
9.4.9 Preset Methods and Sequences
Methods and sequences can be set to display on the Micro GC Fusion main page
and/or the front panel display. Present methods and sequences can be loaded by
selecting the desired method from the Micro GC Fusion main page.
A maximum of ten methods or sequences can be added to the front panel display.
1
In the
Methods/Sequences
window, select the desired methods or sequences to
Preset
by selecting the check box next to the method or sequence.
2
Click the icon to display the main page and verify that the selected method
and/or sequence are displayed.